Home » Lotus Elise Series 2 Rear Clamshell

Lotus Elise Series 2 Rear Clamshell

Lotus Elise Series 2 Rear Clamshell

Full fitting/painting service available at our West Yorkshire HQ - Full accident repair facilities in addition to our servicing and setup services.

We have now developed a replacement rear clamshell for the S2 Elise for both K Series and Toyota Engined cars . Our intensive process for tooling of the clam molds involved not just sourcing an original clamshell but stripping back and prepping the clam.

All the holes and cutouts are done in the factory and captive fixings and brackets are bonded in where required.

The clam is both lighter and stronger than the original Lotus part. The original clams are mass produced using a “vac assist” production method which is great for making large volumes of parts but results in a weaker and heavier product. These clams are entirely made by hand by us and the difference in strength and rigidity are very noticeable. OEM panels have a very high glass content making them heavier and more difficult to repair if damaged.

Uniquely we are also able to offer this in coloured gelcoat so for example if you have a red car we can supply it in red gelcoat. Future stonechips will be less visible!

We believe our replacement clams are the best available and are close to original in terms of fit and finish. Minimal preparation is required before painting and is normally limited to final prep around the “flash lines” that come as a result of our manufacturing process and possibly a small amount of final trimming. The clams can be fitted by any competent DIY owner or bodyshop with experience of Lotus cars. Our clams are also single piece. We changed the production so that the clams are not made up from small individual parts (a cost saving method on the original parts) this again increases the accuracy of the fit.

We can organise freight delivery anywhere in Europe and worldwide. Regular direct delivries to the whole of the UK - France - Netherlands - Germany - Belgium. We ship regularly to USA - Canada - Australia

Delivery times vary - please email or call to confirm.

Product Code: S2CLAM
Reward Points: 0
Availability: Please Email
£1,850.00
Ex Tax: £1,850.00

Available Options


VX220 Hardtop:

Toyota:


K Series:



Qty:  Add to Cart
   - OR -   
0 reviews   0 reviews  |   Write a review

Lotus Elise Series 2 Rear Clamshell

Full fitting/painting service available at our West Yorkshire HQ - Full accident repair facilities in addition to our servicing and setup services.

We have now developed a replacement rear clamshell for the S2 Elise for both K Series and Toyota Engined cars . Our intensive process for tooling of the clam molds involved not just sourcing an original clamshell but stripping back and prepping the clam.

All the holes and cutouts are done in the factory and captive fixings and brackets are bonded in where required.

The clam is both lighter and stronger than the original Lotus part. The original clams are mass produced using a “vac assist” production method which is great for making large volumes of parts but results in a weaker and heavier product. These clams are entirely made by hand by us and the difference in strength and rigidity are very noticeable. OEM panels have a very high glass content making them heavier and more difficult to repair if damaged.

Uniquely we are also able to offer this in coloured gelcoat so for example if you have a red car we can supply it in red gelcoat. Future stonechips will be less visible!

We believe our replacement clams are the best available and are close to original in terms of fit and finish. Minimal preparation is required before painting and is normally limited to final prep around the “flash lines” that come as a result of our manufacturing process and possibly a small amount of final trimming. The clams can be fitted by any competent DIY owner or bodyshop with experience of Lotus cars. Our clams are also single piece. We changed the production so that the clams are not made up from small individual parts (a cost saving method on the original parts) this again increases the accuracy of the fit.

We can organise freight delivery anywhere in Europe and worldwide. Regular direct delivries to the whole of the UK - France - Netherlands - Germany - Belgium. We ship regularly to USA - Canada - Australia

Delivery times vary - please email or call to confirm.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: