Home » VX220/Opel Speedster » VX220 & Opel Speedster Front Clam Assembly

VX220 & Opel Speedster Front Clam Assembly

VX220 & Opel Speedster Front Clam Assembly

Full fitting/painting service available at our West Yorkshire HQ - Full accident repair facilities in addition to our servicing and tuning/setup services

We have now developed a replacement front clamshell for the VX220 and Opel Speedster. Our intensive process for tooling of the clam molds involved not just sourcing an original clamshell but stripping back and prepping the clam.

This process means that the finished reproduction requires almost no paintshop preparation as the surfaces are pre-flatted. All the holes and cutouts are done in the factory. A small amount of final fit and finishing may be required. 

The clam is both lighter and stronger than the original Lotus part (around 12kg against 14kg on the OEM unit). The original clams are mass produced using a “vac assist” production method which is great for making large volumes of parts but results in a weaker and heavier product. These clams are entirely made by hand by us and the difference in strength and rigidity are very noticeable.

Along with the pre prepping of the original clam another important change we made was to make the outer part of the clam in one single piece. This means there is no margin for error in terms of alignment of the different parts of the clamshell which along with poor fit and finish is something that has plagued other’s previous attempts at making this part. 

We have purposefully manufactured this part as a full OEM quality level replacement part able to be used for insurance repairs. Uniquely we are also able to offer this in coloured gelcoat so for example if you have a red car we can supply it in red gelcoat. Future stonechips will be less visible!

The clam is produced to a high standard and will require minor finishing prior to painting. The clam can easily be fitted by and competent DIY owner or bodyshop. 

We can organise freight delivery anywhere in Europe.

When buying a clam we have an exclusive offer of adding a hardtop kit to your order for just £450 extra. If the clam is in for paint why not get the painters to spray you a brand new roof?

Product Code: VXCLAM
Reward Points: 0
Availability: Please Email
£1,500.00
Ex Tax: £1,500.00

Available Options


VX220 Hardtop:



Qty:  Add to Cart
   - OR -   
0 reviews   0 reviews  |   Write a review

VX220 & Opel Speedster Front Clam Assembly

Full fitting/painting service available at our West Yorkshire HQ - Full accident repair facilities in addition to our servicing and tuning/setup services

We have now developed a replacement front clamshell for the VX220 and Opel Speedster. Our intensive process for tooling of the clam molds involved not just sourcing an original clamshell but stripping back and prepping the clam.

This process means that the finished reproduction requires almost no paintshop preparation as the surfaces are pre-flatted. All the holes and cutouts are done in the factory. A small amount of final fit and finishing may be required. 

The clam is both lighter and stronger than the original Lotus part (around 12kg against 14kg on the OEM unit). The original clams are mass produced using a “vac assist” production method which is great for making large volumes of parts but results in a weaker and heavier product. These clams are entirely made by hand by us and the difference in strength and rigidity are very noticeable.

Along with the pre prepping of the original clam another important change we made was to make the outer part of the clam in one single piece. This means there is no margin for error in terms of alignment of the different parts of the clamshell which along with poor fit and finish is something that has plagued other’s previous attempts at making this part. 

We have purposefully manufactured this part as a full OEM quality level replacement part able to be used for insurance repairs. Uniquely we are also able to offer this in coloured gelcoat so for example if you have a red car we can supply it in red gelcoat. Future stonechips will be less visible!

The clam is produced to a high standard and will require minor finishing prior to painting. The clam can easily be fitted by and competent DIY owner or bodyshop. 

We can organise freight delivery anywhere in Europe.

When buying a clam we have an exclusive offer of adding a hardtop kit to your order for just £450 extra. If the clam is in for paint why not get the painters to spray you a brand new roof?

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: